faucet leak

April 7 2022

Tips On How To Stop A Faucet From Dripping

pech704 General Plumbing faucet leak, faucet repair, leaking faucet

A leaking faucet is one of those plumbing concerns that are common in modern properties. As the faucet begins to show signs of aging this is the first problem property owners encounter.

dripping faucet

If this is a situation you are dealing with, it’s time to figure out what to do as soon as possible. Letting things continue in their current state will lead to further plumbing concerns that come with a hefty repair bill.

Here’s a detailed breakdown of what you should do to stop a faucet from dripping…

Remove the Handle or Cap

Check the Seal

Certain faucets are going to have a neoprene seal. These seals tend to break down after a while and are going to start leaking water as soon as their base weakens. To make sure this is the case, look for the seal near the cylinder.

This is a common issue with ceramic disk faucets.

Look for the seal and replace it with a new one. It is going to be a simple change and will make sure the dripping stops before it worsens.

Tighten the O-Ring

In some faucets, there is going to be what’s called an “O-Ring” near the bottom. Once you remove the spout, it’s time to work away at the old O-Ring.

This ring isn’t going to age well and it is the first component that breaks down with a modern faucet. If that is the case, you are going to notice water leaking from there. If that is the case, you are going to have to invest in a similar-sized O-Ring and replace it.

Make sure to use plumber’s grease when you are setting up the new O-Ring.

Faucet Repair In Charlotte, NC

Check the Assembly

Each faucet is going to have an internal assembly that holds everything together. You have to make sure it is tightened as it can loosen after a few years of regular use. Just tightening all of the bolts/caps will go a long way in stopping the dripping.

This is a good thing to check on before, during, and after the DIY repair work is done.

Implement these tips as soon as possible and make sure to keep an eye on the faucet. The goal is to make sure you go through each step in detail and remain vigilant when it comes to the pipes near the faucet. This will ensure the results are effective and the faucet doesn’t start dripping a few minutes later.

December 23 2021

The Best Method For Repairing A Faucet

pech704 Residential Plumbing bathroom faucet repair, faucet leak, faucet repair, kitchen sink faucet leak

Faucets are an integral aspect of any house and they are used on a daily basis. That is why it is essential to keep all the faucets in a home in good working condition. There are many different problems that can plague faucets. At times they leak and they may make noise at other times.

bathroom faucet

In certain situations, it may be possible to fix or repair them, but there may be times when it is important to completely replace them.

Faucet repair is an essential component of bathroom maintenance. One of the more common plumbing problems is a dripping faucet and one of the easiest issues to fix also. Despite that, many individuals ignore it and over time the issue continues to get worse.

Cost Factor

That also means that regular maintenance and additional expenses can help to resolve these types of issues. Aside from the money that you would need to spend on a brand new faucet, just remember that when a leaky faucet is left unattended you could end up wasting a lot of money on water. Also, the water that is wasted from the hot water faucet adds to your expenses to pay to heat water up before it leaks out into the drain.

Leaking Faucet Repair Or Replacement In Charlotte, NC

Steps To Replace A Faucet

In general, you can fix a water faucet by just repairing the seat or replacing the washer. There are some basic steps that you need to follow, no matter what kind of faucet needs to be repaired:

– Turn the water supply off and then remove the handle from the faucet that holds the main part of the faucet together. There is a small screw that holds it in place and may have a plastic disc or button that needs to be unsnapped.

– Now take the handle off and check out the faucet assembly. Take the packing nut off with an adjustable wrench. Then twist the stern or spindle out.

– Take the screw out that is holding the washer in place. Penetrating oil can be used to loosen the nut if necessary. Check out the screw and stem and if necessary replace it.

– Get a new washer with the exact specifications as the old one to replace it. Hot water faucets required special washers. Ones that are used for cold water faucets have a tendency to become over-expanded and are not well-suited for this purpose.

Fasten your new washer onto the faucet stem. Then reinstall the whole assembly in the reverse order that you took it off.

– First, get the handle reinstalled and then replace the button or disc. Turn the water supply on and check the faucets for any leaks.

If you cannot fix your faucet on your own, give us a call to have them replace it. Also, check to see if you have any other leak faucets in ay of your other bathroom to see if they also need to be repaired or replaced.